The 2022 BMW M440I’s 3.0L B58B30O1 turbocharged engine is a performance powerhouse—meaning regular, precise oil changes are critical to keep it running smoothly. Choosing the right oil type, using the correct filter, and following the manufacturer’s oil change interval will help safeguard your investment and maximize performance. For a quick, hassle-free service, find a Costa Oil near you for your next oil change.

What Oil Does a 2022 BMW M440I Take?

BMW recommends a specific motor oil viscosity for the 2022 BMW M440I to ensure optimal lubrication and engine protection under all operating temperatures. The primary viscosity for this model is:

• 0W-20 (All Temperatures) – The manufacturer specifies 0W-20 full synthetic oil for year-round protection, fast cold starts, and long life.

This choice of 0W-20 ensures both performance and efficiency, thanks to its low-viscosity properties. Using the recommended oil type helps maintain warranty coverage and prolongs engine life. Always verify you’re using oil that meets BMW’s Longlife-17 FE+ spec for this engine.

2022 BMW M440I Oil Capacity

The exact oil capacity for the 2022 BMW M440I 3.0L turbo engine is 6.9 quarts (6.5 liters), including a new filter. When topping up or refilling, always double-check the oil level with the electronic dipstick—overfilling can cause leaks, poor running, or even engine damage. Add oil slowly after a change, allowing time for accurate reading and to avoid spills or overfill.

How Often Should You Change the Oil on a 2022 BMW M440I?

BMW recommends changing the oil in your 2022 M440I every 10,000 miles or 12 months, whichever comes first, when using approved full synthetic oil. However, for ideal engine protection—especially if you drive in severe conditions or push performance—a 5,000 to 7,500-mile interval is a smart proactive step. Conventional oils require more frequent changes, but BMW specifically recommends synthetic for this engine. Service sooner if you notice any warning signs or harsher driving conditions:

• Frequent short trips
• High-performance driving
• Extreme temperatures

Never exceed the factory-recommended oil change interval to keep your engine protected and performing at its best.

Oil Filter for the 2022 BMW M440I

An oil filter prevents damaging particles and sludge from circulating in your engine. Quality matters: Costa Oil’s CCF1404 oil filter is engineered to meet or exceed BMW’s OEM specifications, ensuring optimal filtration and flow. Using subpar or generic filters can lead to reduced oil flow, risk of leaks, or even engine wear. Always use premium, OEM-spec filters for your BMW to maintain both performance and factory warranty.

For additional air and cabin protection, Costa Oil also offers these direct-replacement filters:

• Costa Oil Air Filter
• Costa Oil Cabin Air Filter

Step-by-Step: What Happens During a Costa Oil Change

1. Drive in & stay in your car – No appointment needed for our express 10-minute service.
2. Quick registration & engine assessment – Our trained techs confirm your BMW’s oil spec and filter needs.
3. Drain old engine oil – Thorough removal ensures no dirty oil remains.
4. Install a new CCF1404 oil filter – We fit only OEM-quality filters for best protection.
5. Add premium full-synthetic oil – Filled to exactly 6.9 quarts per BMW’s instructions.
6. Final inspection & oil level check – We verify correct fill and reset your oil life monitor, so you drive out with peace of mind.

Our 10-minute process is designed for your convenience—find your nearest Costa Oil location and get expert service by certified technicians, no appointment ever needed.

Signs Your 2022 BMW M440I Needs an Oil Change

• Oil Change Reminder or Warning Light – Dash indicator means oil life is low or expired.
• Engine Ticking or Louder Operation – Thin, dirty oil can’t cushion moving parts, causing noise.
• Exhaust Smoke or Burnt Smell – Contaminated oil may burn off and create visible smoke or odors.
• Darker, Gritty Oil on Dipstick – Healthy oil is amber; dark, dirty oil signals it’s time to change.
• Poor Engine Performance – Hesitation, loss of power, or sluggish throttle response can point to old oil.

Why Costa Oil for Your BMW M440I?

Protect your 2022 BMW M440I’s high-performance engine with Costa Oil’s $50 full synthetic oil change. Service takes just 10 minutes, no appointment needed, and our techs are trained on BMW’s specific requirements. We use OEM-spec filters and only the best full-synthetic motor oil for your model. Trust Costa Oil for dealership-level results without the wait—schedule your oil change at Costa Oil today.

Frequently Asked Questions

How much does a 2022 BMW M440I oil change cost?

At Costa Oil, a full-synthetic oil change for the 2022 BMW M440I is only $50, featuring OEM-spec filters and premium oil for true value and peace of mind.

What type of oil filter does the 2022 BMW M440I use?

Costa Oil installs the CCF1404 filter, designed to meet or exceed BMW’s original specifications for top-quality filtration and fit.

Can I use a different oil viscosity than 0W-20 in my BMW M440I?

Always use BMW’s recommended 0W-20 full synthetic oil for all temperatures. Using another viscosity can reduce engine efficiency and void warranty coverage.

How do I know when it’s time for an oil change if I don’t drive often?

Even if you drive infrequently, change the oil at least once every 12 months or when the BMW system alerts you. Engine oil degrades with time as well as mileage.