How to Change the Oil on a 2022 Ford Explorer – A Step-by-Step Guide
Maintaining the proper oil level and changing the oil on a regular basis is crucial for keeping your 2022 Ford Explorer running smoothly and efficiently. The oil in your vehicle helps to lubricate the engine and protect it from wear and tear. Over time, the oil becomes dirty and loses its effectiveness, so it needs to be replaced. If you’re looking to save some money and do the oil change yourself, this step-by-step guide will help you do it the right way.
Step 1: Gather the necessary tools and supplies Before you begin, you’ll need to gather the following tools and supplies:
- Oil filter wrench
- Oil filter
- Oil drain pan
- Funnel
- New oil (make sure to check your owner’s manual for the recommended type and weight)
Step 2: Raise the vehicle and locate the oil drain plug Using a jack or a lift, raise the front end of your 2022 Ford Explorer so that you can access the oil drain plug. Locate the drain plug, which is typically located near the oil pan at the bottom of the engine.
Step 3: Remove the oil drain plug Using an oil filter wrench, loosen the drain plug and allow the oil to drain into the oil drain pan. Make sure to place the drain pan directly underneath the drain plug to prevent oil from spilling on the ground.
Step 4: Remove the oil filter Locate the oil filter, which is typically located on the side of the engine block. Using an oil filter wrench, loosen and remove the oil filter, making sure to catch any oil that may drain from it.
Step 5: Install the new oil filter Apply a thin layer of clean oil to the seal of the new oil filter. This will help ensure a proper seal and prevent oil leaks. Then, tighten the new oil filter in place.
Step 6: Fill with new oil Using the funnel, fill the engine with the recommended type and weight of oil. Check the oil level using the dipstick and add oil as necessary.
Step 7: Replace the oil drain plug Tighten the oil drain plug securely in place.
Step 8: Check for leaks Start the engine and let it run for a few minutes to circulate the new oil. Check for any oil leaks around the drain plug and oil filter. If everything looks good, you’re done!
Why it may be a good idea to go to a quick lube While changing the oil on your 2022 Ford Explorer yourself can be a cost-effective option, taking it to a quick lube has its benefits. Quick lubes are staffed by professional technicians who are trained to change oil quickly and efficiently. Here are some of the benefits of going to a quick lube:
- Convenience: Quick lubes are designed to be fast and convenient. You don’t have to worry about gathering all the necessary tools and supplies, or finding a place to change the oil. Just drive in, wait a few minutes, and drive out with fresh oil.
- Expertise: Quick lube technicians are experienced and knowledgeable about different vehicles and their oil change requirements. They will make sure that your Ford Explorer is given the right type and weight of oil and that the oil is changed according to the manufacturer’s specifications.
- Time-saving: Changing the oil on your Ford Explorer yourself can take a while, especially if you’re not familiar with the process. By taking your vehicle to a quick lube, you can save time and get back to your day