How To Change The Oil On Your 2022 Mazda CX-5

Changing the oil on your Mazda CX-5 is a crucial part of maintaining your vehicle and keeping it running smoothly. While you can change the oil yourself, it can be time-consuming and requires some technical knowledge. For this reason, many drivers choose to have their oil changed at a quick lube. In this article, we’ll explain how to change the oil on your CX-5 and why it may be a good idea to go to a quick lube.

Steps to Changing the Oil on a 2022 Mazda CX-5

1. Gather Tools and Supplies Before you start changing the oil, make sure you have all the tools and supplies you need. You will need:

• Engine oil
• Oil filter wrench
• Oil filter
• Oil drain pan
• Funnel
• Ratchet and socket set

2. Locate the Oil Drain Plug and Oil Filter The oil drain plug is located on the underside of the engine. The oil filter is typically located near the engine and can be accessed by removing the engine cover.
3. Warm Up the Engine Start the engine and let it run for a few minutes to warm up the oil. This will make it easier to drain the oil and will also help to flush out any debris or contaminants.
4. Place the Oil Drain Pan Place the oil drain pan underneath the oil drain plug. Make sure it is positioned in such a way that the oil will flow into the pan and not onto the ground.
5. Remove the Oil Drain Plug Using the ratchet and socket set, remove the oil drain plug. Be careful not to spill any oil as it drains from the engine. Allow the oil to drain completely into the oil drain pan.
6. Replace the Oil Drain Plug Once the oil has finished draining, replace the oil drain plug and tighten it securely.
7. Replace the Oil Filter Using the oil filter wrench, remove the old oil filter. Carefully pour any remaining oil from the old filter into the oil drain pan. Apply a small amount of oil to the gasket on the new oil filter, and then install the new filter. Tighten the filter securely.
8. Add New Oil Use the funnel to add the recommended amount of new oil to the engine. Check the oil level using the dipstick and add more oil as needed.
9. Start the Engine and Check for Leaks Start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks around the oil drain plug and oil filter. If everything looks good, you can dispose of the old oil and clean up your tools.

Why You Should Consider Going to a Quick Lube for Your Oil Change

While changing the oil yourself can save you money, it can also be time-consuming and requires some technical knowledge. Additionally, if you don’t have the right tools or if you make a mistake, you could cause damage to your vehicle.

This is why many drivers choose to have their oil changed at a quick lube. Quick lubes are designed to provide fast, convenient oil changes that take the hassle out of maintaining your vehicle. Here are some of the benefits of going to a quick lube:

1. Convenience The biggest advantage of going to a quick lube is convenience. You simply drive your vehicle in, have the oil changed, and drive away. This can save you time and effort compared to changing the oil yourself.
2. Expertise Quick lube technicians are trained to change oil quickly and efficiently.